Castle wall (inner corner)

Castle wall (inner corner)



Scale: Please select 1:160 / 10mm 1:100 / 15mm 1:87 / 18mm 1:72 / 20mm 1:64 / 28mm

123456789101112

Share this on...

Castle wall (inner corner)

An inner corner section of stone castle wall from old Japan. At 1:64 / 28mm scale, this section measures 120mm x 120mm, and is approximately 75mm tall. Sections can be fitted with the textured tops to simulate earth or gravel, or the tops can be flipped over if you require smooth surfaces. Clip connectors are included, but sections also feature magnet holes for fast assembly.

This section can also be fitted with a short corner section of defensive walls (included), or just left empty.

* Please note that the upper walls are not textured - they have been sprayed with stone-effect spray in the painted pictures above, prior to painting.

• 1:160 / 10mm : 200 yen
• 1:100 / 15mm : 440 yen
• 1:87 / 18mm : 560 yen
• 1:72 / 20mm : 763 yen
• 1:64 / 28mm : 1,000 yen

Printed in PLA plastic (usually grey) at 0.2mm layer height. This model comes unassembled and unpainted. Due to the nature of FDM printing some layer lines may be visible, but are mostly invisible after painting. You can sand and file down prints to achieve a smoother finish if required before painting.

Samurai models are for scale only, and not included. The product photos above feature 28mm scale miniatures and terrain models.

ASO MILL is the only licensed print partner shop for 3DAlienWorlds models in Japan.