Castle wall (gate)

Castle wall (gate)



Scale: Please select 1:160 / 10mm 1:100 / 15mm 1:87 / 18mm 1:72 / 20mm 1:64 / 28mm

Upper wall: Arrow slit wall Solid wall

123456789101112

Share this on...

Castle wall (gate)

A double-width section of stone castle wall from old Japan, with a large wooden gateway. At 1:64 / 28mm scale, this section measures 240mm x 120mm, and is approximately 75mm tall.  Thin wire can be used in the gatepost holes to hinge the gates, and the locking bar actually works. Clip connectors are included, but sections also feature magnet holes for fast assembly.

Sections can also be fitted with defensive walls (with arrows slits or plain) and support posts, or low pine fences, or just left empty. Please indicate which walls or fences you would prefer.

* Please note that the upper walls are not textured - they have been sprayed with stone-effect spray in the painted pictures above, prior to painting.

• 1:160 / 10mm : 1,000 yen
• 1:100 / 15mm : 2,020 yen
• 1:87 / 18mm : 2,420 yen
• 1:72 / 20mm : 3,040 yen
• 1:64 / 28mm : 4,000 yen

Printed in PLA plastic (usually grey) at 0.2mm layer height. This model comes unassembled and unpainted. Due to the nature of FDM printing some layer lines may be visible, but are mostly invisible after painting. You can sand and file down prints to achieve a smoother finish if required before painting.

Samurai models are for scale only, and not included. The product photos above feature 28mm scale miniatures and terrain models.

ASO MILL is the only licensed print partner shop for 3DAlienWorlds models in Japan.